Crown Victoria V8-4.6L SOHC VIN W (2005)
18. From inside the vehicle, remove the screw.
19. Remove the bolts.
20. Vehicles with EATC
21. Remove the in-car temperature sensor hose and elbow from the evaporator housing (if equipped).
All vehicles
21. Remove the evaporator core housing.
WARNING: If equipped with fire suppression system, repower the system.
22. To install, reverse the removal procedure. If equipped with fire suppression system, repower the system.
-
Clean and lubricate the coolant hoses with coolant hose lubricant or plain water only if needed.
-
Install new O-ring seals lubricated in clean PAG oil.
-
Lubricate the refrigerant system with the correct amount of clean PAG oil.
23. Evacuate, leak test and charge the refrigerant system.