E 150 V8-4.6L (2007)
3. Remove fuel injectors.
^
Discard the O-ring seals.
Assembly
1. NOTE: Install new fuel injector O-ring seals on the fuel injectors.
NOTE: Lubricate the new fuel injector O-ring seals with clean engine oil prior to installation.
Using new O-ring seals, install the fuel injectors.
2. NOTE: Be sure the 8 fuel injectors and the fuel rail are fully seated.
Install the fuel rail and the 4 fuel rail stud bolts.
^
Tighten to 10 Nm (89 inch lbs).
