E 350 V8-6.0L DSL Turbo (2007)
40. NOTE: Align the flat edge with the index feature located on the coolant supply port.
Pull the EGR cooler clamp forward, twist and then slide the EGR cooler hose rearward to remove.
41. Remove the 11 bolts, the 5 stud bolts and the intake manifold.
42. Remove the intake manifold gaskets and the front module O-ring seal.
^
Clean and inspect the gaskets and front module O-ring seal. Install new gaskets or O-ring seal if necessary.
^
Clean and inspect the sealing surfaces.
