Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
6. Separate the right side rear parking brake cable from the support spring.
NOTE: Use care so as not to dislodge the cable support spring from the frame rail.
7. Disconnect the Anti-Lock Brake Sensor (RABS).
Disconnect the RABS harness from the retainers and position it aside.
8. Disconnect the right side rear parking brake cable from the retainers at the axle. Separate the cable from the frame and pull the cable around the
front of the axle.
-
Tie-wrap the cable to the axle.
9. Remove the driveshaft.
10. Position a suitable drain pan under the axle, below the brake hose. Disconnect the brake line at the brake hose.
-
Plug the hose and line fittings.
-
Discard the brass washers.