Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
6. Raise and support the vehicle.
7. Position the brake hose into the retaining bracket and install the retaining clip.
8. Connect the brake line to the brake hose.
NOTE: Position a suitable drain pan under the axle, below the brake hose.
9. Remove the tie wraps retaining the rear parking brake cables to the axle.
10. Properly route the right side rear parking brake cable around the axle and through the frame. Connect the cable to the retainers at the axle and to
the support spring at the frame.
