Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
NOTE: To maintain driveline balance, mark the driveshaft components so they can be reinstalled in their original positions.
7. Remove the driveshaft-to-rear axle companion flange bolts.
8. Disconnect the driveshaft from the rear axle companion flange. Support the driveshaft to the frame using mechanics wire.
9. Remove the differential bearing retaining caps.
NOTE: Mating letters are stamped on the differential bearing retaining caps and the rear axle differential carrier. The letters are in vertical and
horizontal positions. Note the positions of the letters before removal. Matching the letters is important at the time of assembly.
NOTE: To ease removal of the differential case, loosen the differential bearing retaining cap bolts, then pry the differential case, bearing cups and
shims out until they are loose in the differential bearing retaining cups.
