Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
8. On E-Super Duty vehicles, remove the anchor plate.
9. Remove the hub nut.
NOTE: The hub nuts have right-handed threads on both spindles. Do not use power tools on the hub nuts.
10. Remove the outer bearing cone and pull the rear hub straight out and away from the rear axle.
11. Clean the spindle of the rear axle housing.
12. Remove and discard the hub seal. Carefully remove the hub seal from the rear hub with a screwdriver, avoiding damage to the hub bore.
13. Clean all the old grease and axle lubricant out of the rear hub.
