Escape 2WD L4-2.5L Hybrid (2010)
14. NOTICE: Make certain the High Voltage Traction Battery (HVTB) does not mar or damage the interior panels during removal. There is
only 6 mm (0.23 in) clearance on each side.
With an assistant, lift the HVTB off the 2 alignment dowels using a floor crane.
-
Disconnect the 40-pin low voltage connector.
15. NOTICE: Do not strike the headliner with the HVTB (or floor crane) during removal or damage to the headliner could occur.
Cover the battery mounting brackets with protective padding and remove the HVTB from the vehicle.
16. Inspect the HVTB tray drain grommet located in the floor pan underneath the HVTB. Replace if necessary.
17. To install, reverse the removal procedure.
