Escape 4WD V6-3.0L (2008)
2
Remove and discard the accumulator body separator gasket.
3
Remove the accumulator body separator plate.
4
Remove and discard the accumulator body separator gasket.
5
Remove the main control valve body.
9. Separate the transfer plate from the main control valve body.
1
Remove the main control valve body.
2
Remove and discard the valve body separator plate gasket.
3
Remove the valve body separator plate.
4
Remove and discard the valve body separator plate gasket.
5
Remove the transfer plate.
10. Remove the intermediate and overdrive accumulator valve plug retaining plate from the accumulator body assembly.
