Expedition 2WD V8-5.4L (2009)
9. Connect the 2 hood latch cable position retainers.
10. Install the cooling fan shroud. For additional information, refer to Cooling Fan Shroud See: Fan Shroud/Service and Repair.
11. Connect the 2 power steering fluid cooler hoses to the condenser core.
12. Install the front bumper cover.
13. Install the RH and LH headlamp assemblies.
14. Connect the battery ground cable.
15. Fill and bleed the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding See: Service and
Repair/Cooling System Draining, Filling And Bleeding.
16. Fill and bleed the power steering system.
17. Fill the transmission with fluid and verify correct operation.
18. Evacuate, leak test and charge the refrigerant system.
