Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
-
Repeat the procedure for the other side.
29. Install the new differential bearings.
(1) Position the appropriate differential bearing (RH or LH).
(2) Use the appropriate press to install the differential bearing.
-
Repeat the procedure for the other differential bearing.
NOTE: Press against the differential bearing inner cone only.
30. Install the differential case in the housing without the ring gear.
(1) Position the differential case.
(2) Install the bearing caps.
(3) Install the bearing cap bolts.
31. Position the Dial Indicator With Bracketry.
(1) Rotate the differential case to ensure differential bearings are properly seated.
(2) Position the Dial Indicator With Bracketry.