Expedition 4WD V8-4.6L SOHC VIN 6 (1997)
32. Recheck runout with the new differential case and differential bearings.
(1) Rotate the differential case.
(2) Recheck and note the differential case runout.
NOTE: If runout is now within specification, use new differential bearings for assembly. If runout is still excessive, differential case is damaged
and should be replaced.
33. Remove the bearing caps bolts.
34. Remove the differential case from the housing.
(1) Remove the bearing caps.
(2) Remove the differential case.
35. Install the pinion gear and the ring gear.
36. Install the Front Drive Axle assembly.