F 150 4WD V8-4.6L VIN 8 (2010)
V16 VERIFY VEHICLE EQUIPMENT - DSM
-
Verify whether the vehicle is equipped with a Driver Seat Module (DSM).
-
Is the vehicle equipped with a DSM?
Yes
GO to V17.
No
GO to V18.
-------------------------------------------------
V17 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE DSM DISABLED
-
Disconnect: SJB Fuse 12 (7.5A) and Battery Junction Box (BJB) Fuse 74 (30A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other MS-CAN modules pass the network test?
Yes
INSTALL the removed fuses. GO to Pinpoint Test O. See: Pinpoint Test O: The Driver Seat Module (DSM) Does Not Respond To The Scan Tool
No
INSTALL the removed fuses. GO to V18.
-------------------------------------------------
V18 VERIFY VEHICLE EQUIPMENT - DCSM
-
Verify whether the vehicle is equipped with a Dual Climate Controlled Seat Module (DCSM).
-
Is the vehicle equipped with a DCSM?
Yes
GO to V19.
No
GO to V20.
-------------------------------------------------
V19 CHECK FOR RESTORED NETWORK COMMUNICATION WITH THE DCSM DISABLED
-
Disconnect: BJB Fuse 69 (30A).
-
Enter the following diagnostic mode on the scan tool: Network Test.
-
Repeat the network test.
-
Do all other MS-CAN modules pass the network test?
Yes
INSTALL the removed fuse. GO to Pinpoint Test P. See: Pinpoint Test P: The Dual Climate Controlled Seat Module (DCSM) Does Not Respond To
The Scan Tool
No