F 150 4WD V8-4.6L VIN 8 (2010)
-------------------------------------------------
W59 CHECK FOR CORRECT PRB MODULE OPERATION
-
Disconnect all the PRB module connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the PRB module connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new PRB module. REFER to Auxiliary Step / Running Board. CLEAR the DTCs. CONNECT all modules. REPEAT the network test with
the scan tool.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CLEAR the DTCs. CONNECT all
modules. REPEAT the network test with the scan tool.
-------------------------------------------------
W60 CHECK FOR CORRECT DSM OPERATION
-
Disconnect all the DSM connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the DSM connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new DSM. REFER to Body Control Systems. CONNECT all modules. CLEAR the DTCs. REPEAT the network test with the scan tool.
No
The system is operating correctly at this time. The concern may have been caused by a loose or corroded connector. CONNECT all modules.
-------------------------------------------------
W61 CHECK FOR CORRECT DCSM OPERATION
-
Disconnect all the DCSM connectors.
-
Check for:
-
corrosion
-
damaged pins
-
pushed-out pins
-
Connect all the DCSM connectors and make sure they seat correctly.
-
Operate the system and verify the concern is still present.
-
Is the concern still present?
Yes
INSTALL a new DCSM. REFER to Seats. CONNECT all modules. CLEAR the DTCs. REPEAT the network test with the scan tool.
No