F 250 2WD Pickup V8-7.3L DSL (1990)
6.
Install the transmission, connect the MLP/TR sensor harness connector to the sensor. Reinstall the solenoid body connector and heat shield. Be
sure to follow all the normal service procedures associated with transmission installation as outlined in the appropriate Service Manual, Section
07-01.
7.
Clear all Diagnostic Codes, road test and rerun On-Board Diagnostics to verify repair. The kit included with the remanufactured transmission
(Figure 2) includes the following:
^
1 (one) Connector Assembly
^
1 (one) "Red" Pin Separator
^
1 (one) 6-Pin Grommet
^
1 (one) 7-Pin Grommet
^
1 (one) Instruction Sheet (I.S. # 6628)
OTHER APPLICABLE ARTICLES: 95-2-12
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage For 1992-94 Model Years, Basic Warranty
Coverage For 1989-91 Model Years
OPERATION
DESCRIPTION
TIME
950619A
Install TR Sensor Connector
0.2 Hr.
DEALER CODING
BASIC PART NO.
CONDITION CODE
7A247
08
OASIS CODES: 504000
