ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
204-02B Rear Suspension - Courier|Specifications > < Torsion Bar

Fiesta 1996 (08.1995-02.2002)

Rear Suspension - Courier - Wheel Hub Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Materials
Name
Specification
Wheel Bearing Grease
WSD-M1C228-A 

Removal

  1. Remove the parking brake control cover trim.

  1. Lower the parking brake lever and loosen the adjustment nut.
  1. Remove the rear wheel and tire. For additional information, refer to Section  204-04 Wheels and Tires.

  1. Remove the brake drum.
    1. Remove the retainer.
    1. Remove the drum.

  1. CAUTION:
    CAUTION:Use a socket to protect the retaining nut.
    Remove the hub retaining nut.
    1. Remove the dust cap.
    1. Remove the hub retaining nut.

  1. CAUTION:
    CAUTION:Wheel bearings are not available separately, if the wheel bearing retaining circlip is displaced, a new wheel hub must be installed.
    Remove the hub assembly.

Installation

  1. CAUTION:
    CAUTION:Grease the wheel bearing before installing.
    Apply grease meeting Ford specification WSD-M1C288-A to the wheel bearing.
  1. To install, reverse the removal procedure.
  1. Adjust the parking brake cable. For additional information, refer to Section  206-05A Parking Brake and Actuation / 206-05B Parking Brake and Actuation.

204-02B Rear Suspension - Courier|Specifications > < Torsion Bar