ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Wheel Speed Sensor > < Hydraulic Control Unit (HCU)

Fiesta 1996 (08.1995-02.2002)

Anti-Lock Control - Traction Control - Rear Wheel Speed Sensor Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Loosen the wheel nuts.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.
  1. Remove the wheel.

  1. Detach the wheel speed sensor (both sides).

  1. Disconnect the wheel speed sensor wiring harness electrical connector.

  1. Remove the wheel speed sensor wiring harness support bracket and harness.

  1. Detach the wheel speed sensor wiring harness support bracket.

  1. Remove the wheel speed sensor wiring harness.

Installation
  1. NOTE:
    NOTE:Make sure the wheel speed sensor wiring harness is routed correctly on installation.
    To install, reverse the removal procedure.

Front Wheel Speed Sensor > < Hydraulic Control Unit (HCU)