ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Cleaner > < Intake Air Distribution and Filtering
Intake Air Distribution and Filtering - Air Cleaner Intake Pipe Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Loosen the left-hand front wheel nuts.
  1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.
  1. Remove the left-hand front wheel.

  1. Remove the left-hand front fender splash shield.

  1. Remove the air cleaner intake pipe.
    1. Remove the air cleaner intake pipe locking pin.
    1. Rotate the air cleaner intake pipe clockwise.
    1. Remove the air cleaner intake pipe.

Installation

  1. To install, reverse the removal procedure.

Air Cleaner > < Intake Air Distribution and Filtering