Ford Workshop Service and Repair Manuals

Installer

308-045 (16-015)

1. Remove the gearshift mechanism and detach the gearshift stabiliser. For additional information, refer to Section  308-06 Manual Transmission/Transaxle External Controls.

2. Press out the stabiliser bush using a suitable thrust element.

1. 

   NOTE:The bush is tapered and can only be inserted from one side.
   Press in the stabiliser bush.

2. Fit the gearshift stabiliser and install the gearshift mechanism. For additional information, refer to Section  308-06 Manual Transmission/Transaxle External Controls.