ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Generator > < Generator - 1.8L Endura-DI (Lynx) Diesel

Fiesta 1996 (08.1995-02.2002)

Generator and Regulator - Generator—1.8L Endura-DE (Kent) Diesel, Vehicles With: Air Conditioning Fiesta 1996 (08/1995-02/2002)
Removal and Installation

Removal

  1. Disconnect the battery ground cable.
  1. Remove the generator drive belt. For additional information, refer to Section  303-05 Accessory Drive.

  1. Detach the air conditioning compressor (four bolts).
    • Support the compressor using suitable wire or cable tie.

  1. Remove the drive belt tensioner (two bolts).

  1. Disconnect the generator wiring.

  1. Remove the generator upper bolt.

  1. Remove the generator (two bolts).

Installation

CAUTION:
CAUTION:Make sure the generator is tightened using the following graphical sequence, otherwise premature failure of the mounting bracket may occur.
  1. Refit the components in reverse order.

Generator > < Generator - 1.8L Endura-DI (Lynx) Diesel