In-vehicle Repair Special Tool(s) | Installer, Crankshaft Oil Seal 303-395 (21-171) | Removal | -
Remove the timing belt. For additional information, refer to Timing Belt in this section. | | -
Remove the crankshaft timing belt pulley. | | -
Detach the air conditioning (A/C) compressor from the cylinder block and position it to one side. | | -
Remove the oil pan. For additional information, refer to Oil Pan in this section. | | -
Detach the oil pick-up tube from the oil pump and remove the oil pump (engine shown removed for clarity). - Remove and discard the crankshaft front oil seal.
| Installation | -
NOTE:Install a new oil pump gasket. Install the oil pump (engine shown removed for clarity). | | -
NOTE:Install a new oil pump intake pipe gasket. Attach the oil pick-up tube to the oil pump (engine shown removed for clarity). | | -
NOTE:Install a new crankshaft front oil seal. Using the special tool, install the crankshaft front oil seal. | | -
Install the oil pan. For additional information, refer to Oil Pan in this section. | | -
Attach the air conditioning (A/C) compressor to the cylinder block. | | -
Install the crankshaft timing belt pulley. | | -
Install the timing belt. For additional information, refer to Timing Belt in this section. | | |