In-vehicle Repair Special Tool(s) | Universal Flange Holding Wrench 205-072 (15-030A) | | Remover, Crankshaft Oil Seal 303-293 (21-143) | | Installer, Camshaft Oil Seal 303-684 (21-243/1) | Removal | -
Remove the timing belt. For additional information, refer to Timing Belt in this section. | | -
Using the special tool, remove the camshaft pulley. | | -
Using the special tool, remove the camshaft oil seal. | Installation | -
NOTE:A new camshaft oil seal is supplied with an alignment and protection sleeve that must be removed following installation. Using the special tool, install the camshaft oil seal. - Remove and discard the alignment sleeve.
| | -
Using the special tool, install the camshaft pulley. | | -
Install the timing belt. For additional information, refer to Timing Belt in this section. | | |