In-vehicle Repair Name Specification Engine Oil WSS-M2C913-B Loctite 7070 Sealer WSE-M4G323-A4 Removal | -
Raise and support the vehicle. For additional information, refer to: Lifting (100-02 Jacking and Lifting, Description and Operation). | | -
NOTE:Do not install a new oil drain plug seal at this stage. Install the oil drain plug. | | -
Remove the oil pan retaining bolts and nuts (16 bolts, two nuts). | | -
CAUTION:Do not distort the oil pan. Using a suitable spatula, remove the oil pan. - Slide the spatula around the profile of the oil pan.
| Installation | -
NOTE:Do not damage the mating faces. Clean the mating faces of the oil pan and the lower crankcase with Loctite 7070. | | -
CAUTION:Install the oil pan within four minutes of applying the sealer. Apply a 3 mm bead of sealer to the mating face of the oil pan. | | -
Install the oil pan (16 bolts, two nuts). | | -
Remove the oil drain plug. | | -
NOTE:Install a new oil drain plug seal. Install the oil drain plug. | | |