ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Crankshaft Front Seal > < Intake Manifold

Fiesta 2002.25 (11.2001-)

Engine - 1.3L Duratec-8V (Rocam) - Valve Cover Fiesta 2002.25 (11/2001-)
In-vehicle Repair

Removal

  1. Remove the air cleaner. For additional information, refer to Section  303-12 Intake Air Distribution and Filtering.

  1. Disconnect the spark plug electrical connectors (engine shown removed for clarity).

  1. Disconnect the electronic ignition (EI) electrical connector.

  1. Detach the evaporative emission (EVAP) canister purge valve retaining bracket from the valve cover.

  1. Detach the positive crankcase ventilation (PCV) hose from the valve cover.

  1. Disconnect the camshaft position (CMP) sensor electrical connector.

  1. Remove the valve cover.

Installation

  1. NOTE:
    NOTE:Install a new valve cover gasket if necessary.
    To install, reverse the removal procedure.

Crankshaft Front Seal > < Intake Manifold