Ford Workshop Service and Repair Manuals

Adapter for 303-035 (Support Bars)

303-035-01 (21-005B-01)

Installer, Valve Stem Collets

303-362 (21-156)

Adapter, Air Supply (Cylinder Head)

303-363 (21-157)

Compressor Valve Spring

303-461 (21-194)

Adapter for 303-461

303-461-01 (21-194-01)

Pliers, Valve Stem Oil Seal

303-508 (21-211)

1. Remove the camshaft follower.
   For additional information, refer to Camshaft Followers in this section.
   

2. Using the special tool, apply approximately 7-10 bar of compressed air into the appropriate cylinder.

3. Using the special tools, remove the intake valve collets.

4. Using the special tools, remove the exhaust valve collets.

5. Remove the valve spring retainers and springs.

6. Using the special tool, remove the valve seals.
   • Discard the seals.

1. 

   NOTE:Install new valve seals.
   To install, reverse the removal procedure.