Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Timing Belt >
< Camshafts
Focus 1999 (08.1998-12.2004)
Mechanical Repairs
3 Powertrain / 303 Engine
303-01B Engine - 1.6L Zetec-E (Zetec)-1.8L Zetec-E (Zetec)-2.0L Zetec-E (Zetec)
Description and Operation / Diagnosis and Testing
General Procedures
In-vehicle Repair
Camshaft Seal
Engine - 1.6L Zetec-E (Zetec)/1.8L Zetec-E (Zetec)/2.0L Zetec-E (Zetec) - Camshaft Seal
Focus 1999 (08/1998-12/2004)
In-vehicle Repair
Special Tool(s)
Puller, oil seal
303-039 (21009B)
Materials
Name
Specification
Sealant
WSK-M4G348-A2
Engine Oil
WSS-M2C912-A1
Removal
Remove the timing belt.
For additional information, refer to
timing belt
in this section.
Detach the camshaft pulleys from the camshafts.
Unscrew the bolts.
Remove both front camshaft bearing caps.
Remove the camshaft oil seals.
Installation
Apply
sealant
thinly to the camshaft bearing caps.
Install both front camshaft bearing caps.
1st stage: 10 Nm
2nd stage: 19 Nm
Fit the camshaft oil seals.
Lubricate the camshaft and oil seal lip with
engine oil
.
Install a new oil seal using the special tool, a washer and an M10x70 bolt.
NOTE:
The camshaft timing pulleys must be able to turn freely on the camshafts. Do not tighten the bolts.
Attach the camshaft timing belts.
Install a new timing belt.
For additional information, refer to
timing belt
in this section.
Mechanical Repairs
3 Powertrain / 303 Engine
303-01B Engine - 1.6L Zetec-E (Zetec)-1.8L Zetec-E (Zetec)-2.0L Zetec-E (Zetec)
Description and Operation / Diagnosis and Testing
General Procedures
In-vehicle Repair
Camshaft Seal
Timing Belt >
< Camshafts