General Procedures All vehicles | -
Place the vehicle on a level surface. | | -
Make sure that the tires are inflated to the correct pressure and that the vehicle is not abnormally laden. | | -
Switch on the front fog lamps. | | -
Set the measuring screen of the beam setting equipment to the correct front fog lamp adjustment setting. | Vehicles built up to 10/2001 | -
Adjust the front fog lamps so that the boundary line touches the horizontal line. | Vehicles built 10/2001 onwards | -
Adjust the front fog lamps so that the boundary line touches the horizontal line. | Vehicles with Duratec ST engine | -
Adjust the front fog lamps so that the boundary line touches the horizontal line. | |