ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Lamp Switch > < High Beam Headlamp Bulb - Vehicles With: High Intensity Discharge Headlamps
Exterior Lighting - Low Beam Headlamp Bulb—Vehicles With: High Intensity Discharge Headlamps Focus 1999 (08/1998-12/2004)
Removal and Installation

Removal

All vehicles
  1. Remove the headlamp assembly.
    For additional information, refer to Headlamp Assembly in this section.
WARNING:
WARNING:High voltages are present in this system. Make sure that the headlamp assembly electrical connector is disconnected if the headlamp rear cover is removed. Failure to follow these instructions may result in personal injury.

  1. Remove the headlamp rear cover.
Vehicles built up to 03/2002

  1. CAUTION:
    CAUTION:Make sure that the headlamps are not switched on with the headlamp bulb electrical connector disconnected.
    CAUTION:
    CAUTION:Make sure that the headlamp bulb retaining ring does not turn during the headlamp bulb ignitor removal.
    NOTE:
    NOTE:The headlamp bulb ignitor electrical connector will be disconnected automatically during the headlamp bulb ignitor removal.
    Remove the headlamp bulb ignitor.

  1. Remove the headlamp bulb retaining ring.
Vehicles built 04/2002 onwards

  1. CAUTION:
    CAUTION:Make sure that the headlamps are not switched on with the headlamp bulb electrical connector disconnected.
    NOTE:
    NOTE:The headlamp bulb ignitor electrical connector will be disconnected automatically during the headlamp bulb ignitor removal.
    Remove the headlamp bulb ignitor.

  1. Detach the headlamp bulb U-clip from the fixings.
All vehicles

  1. WARNING:
    WARNING:Wear safety glasses and protective gloves when removing and installing Xenon headlamp bulbs. Failure to follow these instructions may result in personal injury.
    CAUTION:
    CAUTION:Do not touch the glass surface of the headlamp bulb.
    Remove the headlamp bulb.

Installation

All vehicles

  1. Install the headlamp bulb.
Vehicles built up to 03/2002

  1. Install the headlamp bulb retaining ring.
Vehicles built 04/2002 onwards

  1. Attach the headlamp bulb U-clip to the fixings.
All vehicles

  1. Install the headlamp bulb ignitor.

  1. Connect the headlamp ignitor electrical connector.

  1. Install the headlamp assembly rear cover.
  1. Install the headlamp assembly.
    For additional information, refer to Headlamp Assembly in this section.

Lamp Switch > < High Beam Headlamp Bulb - Vehicles With: High Intensity Discharge Headlamps