Removal and Installation Removal | -
Remove the insert from the front of the floor console. | | -
Remove the floor console front retaining screws. | | -
Detach the automatic transaxle selector lever trim panel from the floor console. - Detach the retaining clips.
| | -
Remove the automatic transaxle selector lever trim panel. - Disconnect the traction control electrical connector.
- Disconnect the heated seats electrical connectors (if equipped).
| | -
Remove the insert from the rear of the floor console. | | -
Remove the floor console rear retaining nut. | | -
Fully raise the parking brake lever and detach the boot. | | -
Disconnect the auxiliary power electrical connector. | | -
Remove the floor console. | Installation | -
To install, reverse the removal procedure. | | |