Removal and Installation Removal | -
NOTE:Make sure that the wiper motor is in park position. Remove the wiper arm. - Lift up the plastic cap and loosen the nut approx. two turns.
- Lift the wiper arm and release them from the taper by moving them to one side.
- Remove the nut and the wiper arm.
| | -
Remove the wiper motor. - Disconnect the wiper motor electrical connector.
- Remove the ground lead.
| | -
Remove the wiper motor from the bracket. | Installation | -
NOTE:Make sure that the wiper motor is in the parked position. To install, reverse the removal procedure. | | -
Check operation of wipers. | | |