In-vehicle Repair Special Tool(s) | Remover, Crankshaft Seal 303-293 | | Installer, Camshaft Seal 303-199A | Removal | -
Remove the timing belt. For additional information, refer to: Timing Belt (303-01F Engine - 1.8L Duratorq-TDCi (Lynx) Diesel, In-vehicle Repair). | | -
Remove the camshaft pulley. | | -
Using the special tool, remove the camshaft seal. - Discard the camshaft seal.
| Installation | -
NOTE:Install a new camshaft seal. Using the special tool, install the camshaft seal. | | -
NOTE:Do not fully tighten the camshaft pulley retaining bolt at this stage. Install the camshaft pulley. | | -
Install the timing belt. For additional information, refer to: Timing Belt (303-01F Engine - 1.8L Duratorq-TDCi (Lynx) Diesel, In-vehicle Repair). | | |