ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Clutch Pedal Position (CPP) Switch > < Idle Air Control (IAC) Valve - 1.6L (Z6)

Focus 2004.75 (07.2004-)

Electronic Engine Controls - Intake Manifold Tuning (IMT) Valve—1.8L Duratec-HE (MI4)/2.0L Duratec-HE (MI4) Focus 2004.75 (07/2004-)
Removal and Installation

  1. Remove the throttle Body. For additional information, refer to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls / 303-04D Fuel Charging and Controls / 303-04E Fuel Charging and Controls - Turbocharger / 303-04F Fuel Charging and Controls / 303-04G Fuel Charging and Controls / 303-04H Fuel Charging and Controls / 303-04I Fuel Charging and Controls - Turbocharger.

  1. Detach the vacuum lines from the IMT valve (intake manifold shown removed for clarity).

3. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description
1
-
IMT valve vacuum pipe
2
-
IMT valve retaining screws
3
-
IMT valve
See Removal Detail

4. To install, reverse the removal procedure.

Removal Details

Item 3 : IMT valve
  1. Detach the IMT valve actuator rod from the intake manifold (intake manifold shown removed for clarity).

Clutch Pedal Position (CPP) Switch > < Idle Air Control (IAC) Valve - 1.6L (Z6)