Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Output Shaft Speed (OSS) Sensor >
< Main Controls
Focus 2004.75 (07.2004-)
Mechanical Repairs
3 Powertrain
307 Automatic Transmission-Transaxle / 307-01A Automatic Transmission-Transaxle - Vehicles With: 4-Speed Automatic Transmission (4F27E)
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Turbine Shaft Speed (TSS) Sensor
Automatic Transmission/Transaxle - Vehicles With: 4-Speed Automatic Transmission (4F27E) - Turbine Shaft Speed (TSS) Sensor
Focus 2004.75 (07/2004-)
In-vehicle Repair
Materials
Name
Specification
Sealant - Loctite 270
SD-M4G9107-A
Removal
Disconnect the turbine shaft speed (TSS) sensor electrical connector.
Remove the TSS sensor (transaxle shown removed for clarity).
Check the TSS sensor bore.
Check the O-ring seal for nicks or cuts.
Installation
NOTE:
Install a new TSS sensor O-ring if necessary.
NOTE:
Apply a light coat of petroleum jelly to the O-ring seal before installation.
To install, reverse the removal procedure.
Apply
sealant
to the TSS sensor retaining bolt thread.
Mechanical Repairs
3 Powertrain
307 Automatic Transmission-Transaxle / 307-01A Automatic Transmission-Transaxle - Vehicles With: 4-Speed Automatic Transmission (4F27E)
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Turbine Shaft Speed (TSS) Sensor
Output Shaft Speed (OSS) Sensor >
< Main Controls