ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

In-vehicle Repair|Removal > < Halfshaft Seal LH
Automatic Transmission/Transaxle - Vehicles With: Automatic Transmission (CFT23) - Halfshaft Seal RH Focus 2004.75 (07/2004-)
In-vehicle Repair

Special Tool(s)

Remover, Crankshaft Rear Oil Seal

303-336

Installer, Crankshaft Oil Seal

303-395

Remover, Mainshaft Double Lip Oil Seal

308-151

1. Remove the components in the order indicated in the following illustration(s) and table(s).

 
Item
Part Number
Description

2. To install, reverse the removal procedure.

Removal Details

Item 1 : Right-hand front drive halfshaft

  1. Remove the right-hand front drive halfshaft.
    For additional information, refer to: Rechte Antriebswelle.

Item 2 : Halfshaft oil seal

  1. Punch the halfshaft oil seal at one position using the special tool (left-hand side shown).

  1. Attach the special tool (left-hand side shown).
    1. Attach the special tool using a self-tapping screw.
    1. Punch through the three further holes in the halfshaft oil seal using the special tool.

  1. Install the self-tapping screws (left-hand side shown).

  1. Remove the halfshaft oil seal using the special tool (left-hand side shown).
    • Tighten the self-tapping screws evenly, work diagonally.

Installation Details

Item 2 : Halfshaft oil seal

  1. NOTE:
    NOTE:Install a new halfshaft oil seal.
    Install the halfshaft oil seal using the special tool.

Item 1 : Right-hand front drive halfshaft

  1. Install the right-hand front axle driveshaft.
    For additional information, refer to: Rechte Antriebswelle.

In-vehicle Repair|Removal > < Halfshaft Seal LH