| Removal and Installation Electric hand drill Blind rivet gun-hand | | -
Remove the rear door window glass.
For additional information, refer to: Rear Door Window Glass - Vehicles With: Power Windows (501-11 Glass, Frames and Mechanisms, Removal and Installation).
| | | -
Remove the rear door window regulator motor.
For additional information, refer to: Rear Door Window Regulator Motor (501-11 Glass, Frames and Mechanisms, Removal and Installation).
| | | -
Disconnect the power window control switch electrical connector. | | | -
Disconnect the door latch remote control cable from the door latch remote control. - Operate the door latch remote control handle lock to the lock position.
| | | -
Detach the wiring harness from the B-pillar. | | | -
Disconnect the wiring harness at the B-pillar and push it into the door. | | | -
Remove the exterior rear door handle.
For additional information, refer to: Exterior Rear Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).
| 10. Remove the components in the order indicated in the following illustration(s) and table(s). 1 - Door inner panel retaining bolts 11. To install, reverse the removal procedure. Removal Details Item 2 : Door inner panel | | -
Remove the rear door latch retaining screws. | | | -
Remove the rear door latch bracket retaining screw. | Item 3 : Rear door window regulator Installation Details Item 3 : Rear door window regulator | | -
Align the window regulator with the window regulator motor retaining screw holes and rivet holes in the door inner panel. | | | -
Install the window regulator motor. | |
