ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
General Procedures > < Glass, Frames and Mechanisms - Vehicles Without: Global Closing

Focus 2004.75 (07.2004-)

Glass, Frames and Mechanisms - Glass, Frames and Mechanisms—Vehicles With: Global Closing Focus 2004.75 (07/2004-)
Diagnosis and Testing

Refer to Wiring Diagrams Section 501-11, for schematic and connector information.

General Equipment
Worldwide diagnostic system (WDS)

Inspection and Verification

  1. Verify the customer concern.
  1. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
  • Window seal
  • Door window frame
  • Fuse(s)
  • Electrical connector(s)
  • Switch(es)
  • Circuit(s)
  1. Initialize the door window motors.
    REFER to     Door Window Motor Initialization - in this section.
  1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  1. If the cause is not visually evident, verify the symptom and refer to WDS.

General Procedures > < Glass, Frames and Mechanisms - Vehicles Without: Global Closing