| Removal and Installation | | -
Empty the windshield washer reservoir. | | | -
Detach the right-hand front wheel.
For additional information, refer to: Rad und Reifen (204-04, Removal and Installation).
| | | -
Remove the right-hand wheelhouse cover. | 4. Remove the components in the order indicated in the following illustration(s) and table(s). 2 - Windshield washer upper reservoir lower retaining bolt 3 - Windshield washer upper reservoir upper retaining bolt 5 - Front windscreen washer pump connector 5. To install, reverse the removal procedure. Removal Details Item 1 : Front windscreen washer lower reservoir connecting piece | | -
Pull the connecting piece of the lower reservoir from the upper reservoir. | Item 4 : Windshield washer upper reservoir | | -
Pull the reservoir from the filler neck. | Item 6 : Windshield washer pump hoses. | | -
Unclip the reservoir hoses. | Installation Details Item 7 : Windshield washer pump | | -
Coat the pump rubber seal – on the front windscreen washer with soap prior to installation. | | 
