| Removal and Installation 1. Remove the components in the order indicated in the following illustration(s) and table(s). CAUTION:Make sure that the windshield wiper motor is in the park position. 1 - Windshield wiper arm nuts 3 - Clips, cowl panel grille 5 - Bolts for windshield wiper motor with linkage 7 - Windshield wiper motor connector 2. To install, reverse the removal procedure. | | -
Check the angle of the windshield wiper arms in relation to the windshield.
For additional information, refer to: Vorderen Wischerarm einstellen (501-16, General Procedures).
| Removal Details Item 8 : Windshield wiper motor | | -
Detach the wiper linkage from the Windshield wiper motor lever arm. | | | -
Remove the windshield wiper motor bolts. | | | -
Pull windshield wiper motor from the wiper motor bracket. | Installation Details Item 2 : Windshield wiper arms CAUTION:Move the windshield wiper motor to park position before installing the windshield wiper arms. | 
