| Removal and Installation Removal NOTE:Removal steps in this procedure may contain installation details. | | -
Remove the convertible top headliner. Refer to: Convertible Top Headliner (501-18 Convertible Top, Removal and Installation). | | | -
NOTE:Note the position of each component before removal. | Installation | | -
NOTE:Make sure that these components are installed to the noted removal position. NOTE:Only tighten the nuts finger tight at this stage. | | | -
Adjust the convertible top front latches. Refer to: Convertible Top Alignment (501-18 Convertible Top, General Procedures). | | | -
Install the convertible top headliner. Refer to: Convertible Top Headliner (501-18 Convertible Top, Removal and Installation). | | | -
-
Operate the convertible top switch to the down/open position until the convertible top is fully open. -
Operate the convertible top switch to the up/closed position until the convertible top is fully closed. | | |
