Removal and Installation Removal | -
Remove the loadspace trim panel. Refer to: Loadspace Trim Panel - Convertible (501-05 Interior Trim and Ornamentation, Removal and Installation). | Installation | -
To install, reverse the removal procedure. | | -
Bleed the convertible top hydraulic system. Refer to: System Bleeding (501-18 Convertible Top, General Procedures). | | -
Initialize the door window motors. Refer to: Door Window Motor Initialization (501-11 Glass, Frames and Mechanisms, General Procedures). | | -
-
Operate the convertible top switch to the down/open position until the convertible top is fully open. -
Operate the convertible top switch to the up/closed position until the convertible top is fully closed. | | |