Ford Workshop Service and Repair Manuals

Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

Remove the bumper lower cover (left hand side shown).

Disconnect the front fog lamp electrical connector.

Remove the front fog lamp.

Install the front fog lamp.

Connect the front fog lamp electrical connector.

Lower the vehicle.

Place the vehicle on a level surface.

Make sure that the tires are inflated to the correct pressure and that the vehicle is not abnormally laden.

Switch on the front fog lamps.

Set the measuring screen of the beam setting equipment to the correct front fog lamp adjustment setting.

Adjust the front fog lamp.

Adjust the front fog lamp so that the boundary line touches the horizontal line.

Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

Install the bumper lower cover (left hand side shown).

Lower the vehicle.