| Removal and Installation Removal | | -
Remove the cowl panel grille.
For additional information, refer to: Cowl Panel Grille - Vehicles Built Up To: 11/2003 (501-02 Front End Body Panels, Removal and Installation) /
Cowl Panel Grille - Vehicles Built From: 11/2003 (501-02 Front End Body Panels, Removal and Installation).
| | | -
Remove the wiper mounting arm and pivot shaft retaining bolts. | | | -
Remove the bulkhead extension. | | | -
Remove the windshield wiper motor bracket retaining bolt. | | | -
Disconnect the windshield wiper motor electrical connector. | | | -
Remove the wiper mounting arm and pivot shaft with the windshield wiper motor. - Unclip the wiper motor wiring harness from the wiper mounting arm.
| Installation | | -
To install, reverse the removal procedure. | | | -
Adjust the windshield wiper arms.
For additional information, refer to: Wiper Blade and Pivot Arm Adjustment (501-16 Wipers and Washers, General Procedures).
| | |
