ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Front Stabilizer Bar > < Front Strut and Spring Assembly

Ikon 1999 (01.2000-)

Front Suspension - Lower Arm Ball Joint Ikon 1999 (01/2000-)
Removal and Installation

Removal

  1. Remove the lower arm.
    For additional information, refer to Lower Arm in this section.

  1. Remove and discard the lower arm ball joint.
    • Drill out the rivets.

Installation
  1. Install the new lower arm ball joint.
  1. Install the lower arm.
    For additional information, refer to Lower Arm in this section.
  1. Check the toe setting and adjust as necessary. For additional information, refer to Section  204-00 Suspension System - General Information.

Front Stabilizer Bar > < Front Strut and Spring Assembly