Ford Workshop Service and Repair Manuals

Remover, Power Steering Pump Pulley

13 - 022 (211 - 199)

Installer, Pulley, Camshaft

303 - 458 (21 - 192)

1. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

2. Detach the accessory drive belt from the power steering pump pulley.
   • Rotate the accessory drive belt tensioner clockwise.

3. 

   CAUTION:To prevent ingress of power steering fluid into the generator, the power steering fluid must be drained.
   Disconnect the power steering fluid cooler lines from the power steering fluid cooler.
   • Allow the fluid to drain into a suitable container.

4. Lower the vehicle.

5. 

   CAUTION:Using a suitable cloth, cover the generator to prevent ingress of power steering fluid.
   Disconnect the power steering low - pressure line from the power steering pump.
   • Allow the fluid to drain into a suitable container.

6. Disconnect the power steering high - pressure line.
   1. Disconnect the power steering high - pressure line from the power steering pump.
   2. Remove the power steering pump and power steering high - pressure line support bracket bolt.
   • Allow the fluid to drain into a suitable container.

7. Remove the power steering pump.

8. 

   NOTE:When installing a new power steering pump, the power steering pump pulley should be removed and retained.
   Using the special tool, remove the power steering pump pulley.

1. 

   NOTE:When installing a new power steering pump, install the power steering pump pulley.
   Using the special tool, install the power steering pump pulley.

2. Install the power steering pump.

3. Connect the power steering high - pressure line.
   1. Connect the power steering high - pressure line.
   2. Install the power steering pump and power steering high - pressure line support bracket bolt.

4. Connect the power steering low - pressure line.

5. Raise and support the vehicle. For additional information, refer to Section  100-02 Jacking and Lifting.

6. Attach the accessory drive belt to the power steering pump pulley.
   • Rotate the accessory drive belt tensioner clockwise.

7. Connect the power steering fluid cooler lines to the power steering fluid cooler.

8. Lower the vehicle.

9. Fill and bleed the power steering system. For additional information, refer to Section  211-02 Power Steering.