ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Throttle Position (TP) Sensor - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)-1.3L Endura-E (HCS) > < Powertrain Control Module (PCM) - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)-1.3L Endura-E (HCS)

Ikon 1999 (01.2000-)

Electronic Engine Controls - Crankshaft Position (CKP) Sensor—1.3L Duratec-8V (Rocam)/1.6L Duratec-8V (Rocam) Ikon 1999 (01/2000-)
Removal and Installation

Removal

  1. Remove the engine undershield. For additional information, refer to Section  502-00 Uni-Body, Subframe and Mounting System.

  1. Disconnect the crankshaft position (CKP) sensor electrical connector (starter motor removed for clarity).

  1. Remove the CKP sensor (starter motor removed for clarity).

Installation
  1. To install, reverse the removal procedure.

Throttle Position (TP) Sensor - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)-1.3L Endura-E (HCS) > < Powertrain Control Module (PCM) - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam)-1.3L Endura-E (HCS)