ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
General Procedures > < 310-01 Fuel Tank and Lines|Specifications

Ikon 1999 (01.2000-)

Acceleration Control - Acceleration Control Ikon 1999 (01/2000-)
Diagnosis and Testing

Inspection and Verification

  1. Verify the customer concern.
  1. Visually inspect for obvious signs of mechanical or electrical damage.

Visual Inspection Chart

Mechanical Electrical
Accelerator pedal Fuse(s)
Accelerator cable Relay(s)
Linkage Wiring harness
Electrical connector(s)
Powertrain control module (PCM)
  1. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  1. If the concern is not visually evident, verify the symptom and refer to the Symptom Chart.

Symptom Chart

Symptom Possible Sources Action
Accelerator pedal is hard to depress or has a rough/raspy or sticky feel
*
Damaged accelerator cable.
*
INSTALL a new accelerator cable.
*
Accelerator cable incorrectly installed.
*
CHECK the accelerator cable for correct installation.
*
Worn or damaged throttle body.
*
INSTALL a new throttle body. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.6L engine. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.25L engine built 02/2000 onwards.
Accelerator pedal does not return freely
*
Damaged accelerator cable.
*
INSTALL a new accelerator cable.
*
Weak or broken throttle return spring.
*
INSTALL a new throttle body. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.6L engine. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.25L engine built 02/2000 onwards.
*
Worn or damaged throttle body.
*
INSTALL a new throttle body. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.6L engine. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.25L engine built 02/2000 onwards.
High engine idle speed
*
Damaged accelerator cable.
*
INSTALL a new accelerator cable.
*
Accelerator cable incorrectly installed.
*
CHECK the accelerator cable for correct installation.
*
Worn or damaged throttle body.
*
INSTALL a new throttle body. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.6L engine. REFER to Section  303-04A Fuel Charging and Controls / 303-04B Fuel Charging and Controls / 303-04C Fuel Charging and Controls. - vehicles with 1.25L engine built 02/2000 onwards.

General Procedures > < 310-01 Fuel Tank and Lines|Specifications