ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Accelerator Cable Adjustment - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam) > < Acceleration Control

Ikon 1999 (01.2000-)

Acceleration Control - Accelerator Cable Adjustment—1.3L Endura-E (HCS) Ikon 1999 (01/2000-)
General Procedures
  1. Remove the accelerator cable adjuster clip.

  1. Pull the accelerator cable adjuster apart.
  1. Fully depress the accelerator pedal and hold.

  1. Refit the accelerator cable adjuster clip.
  1. Release the accelerator pedal and check that the throttle plate returns to the fully closed position.

Accelerator Cable Adjustment - 1.3L Duratec-8V (Rocam)-1.6L Duratec-8V (Rocam) > < Acceleration Control