ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Crankshaft Front Seal > < Crankshaft Pulley

Maverick 2001 (12.2000-07.2004)

Engine - 2.0L Zetec-E (Zetec) - Valve Cover Maverick 2001 (12/2000-07/2004)
In-vehicle Repair

Removal

  1. Remove the air cleaner outlet pipe. For additional information, refer to Section 303-12 Intake Air Distribution and Filtering.

  1. Remove the ignition wires from the spark plugs.

  1. Disconnect the throttle cables.
    • Disconnect the speed control actuator cable (if equipped).
    • Disconnect the accelerator cable.

  1. Remove the valve cover.
    1. Remove the studbolts
    1. Remove the bolts.
  1. CAUTION:
    CAUTION:The valve cover sealing surfaces are soft materials. Do not use abrasive grinding discs to remove gasket material; only use manual scrapers. Do not scratch or gouge sealing surfaces or oil leaks may occur.
    Clean and inspect the sealing surfaces of the valve cover and the cylinder head. Both surfaces must be clean and flat.
  1. To install, reverse the removal procedure.
    • Install a new valve cover gasket if damaged.

Crankshaft Front Seal > < Crankshaft Pulley