Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Halfshaft Seal LH >
< Vehicle Speed Sensor (VSS)
Mondeo 1997 (08.1996-09.2000)
Mechanical Repairs
3 Powertrain
307 Automatic Transmission-Transaxle / 307-01 Automatic Transmission-Transaxle
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Turbine Shaft Speed (TSS) Sensor
Automatic Transmission/Transaxle - Turbine Shaft Speed (TSS) Sensor
Mondeo 1997 (08/1996-09/2000)
In-vehicle Repair
Materials
Name
Specification
Automatic transmission fluid
ESPM-2C166-H
Removal
Raise and support the vehicle. For additional information, refer to Section
100-02 Jacking and Lifting
.
Place a drain pan beneath the turbine shaft speed (TSS) sensor.
Remove the TSS sensor.
Disconnect the TSS sensor electrical connector.
Remove the bolt.
Inspect the TSS sensor bore.
Inspect the O-ring seal for nicks or cuts; install a new as necessary.
Installation
NOTE:
Apply a light coat of petroleum jelly to the O-ring seal before installation.
Install the TSS sensor.
Connect the TSS electrical connector.
Remove the drain pan.
Lower the vehicle.
Check the transmission fluid level, add
Automatic transmission fluid
.
Start the engine and move the transaxle range selector lever through all gear positions.
Mechanical Repairs
3 Powertrain
307 Automatic Transmission-Transaxle / 307-01 Automatic Transmission-Transaxle
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Turbine Shaft Speed (TSS) Sensor
Halfshaft Seal LH >
< Vehicle Speed Sensor (VSS)