ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

ABOUT US
Inertia Fuel Shutoff (IFS) Switch > < Fuel Tank

Mondeo 1997 (08.1996-09.2000)

Fuel Tank and Lines - Fuel Filter—1.6L/1.8L/2.0L/2.5L Mondeo 1997 (08/1996-09/2000)
Removal and Installation

Removal

WARNING:
WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions can result in personal injury.
WARNING:
WARNING:Before repairing or disconnecting any fuel lines or components, the fuel system pressure must be relieved. Failure to follow this instruction can result in personal injury.
  1. Relieve the fuel pressure. For additional information, refer to Section  310-00A Fuel System - General Information / 310-00B Fuel System - General Information.

  1. Disconnect the pipes. Release the clip and remove the filter.
    • Catch the displaced fuel in a suitable container.

Installation
  1. WARNING:
    WARNING:Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable mixtures are always present and can ignite. Failure to follow these instructions can result in personal injury.
    NOTE:
    NOTE:Fit the filter with the flow arrow pointing in the correct direction.
    To install, reverse the removal procedure.
    • Use a new clip if required.

Inertia Fuel Shutoff (IFS) Switch > < Fuel Tank